Canada Outdoor Furniture Manufacturers: 12 Companies to Vet

Procurement teams vetting outdoor furniture manufacturers Canada need a shortlist they can defend, not a directory of resellers. This page sorts 12 companies into three groups: those with a Canadian manufacturing footprint, those that sell in Canada without publicly disclosing Canadian production, and the names that get mistaken for manufacturers but are not outdoor furniture makers at all.

Disclosure. OGPSGroup is an outdoor furniture manufacturer and sourcing group based in Guangdong, China. This page helps North American buyers tell Canadian factories apart from resellers and importers. No company listed here paid for inclusion. Manufacturers may submit plant addresses and test documents for correction.

If you would rather run the checks before reading the profiles, the six-gate vetting checklist is a printable PDF.

Download the Canada Supplier Vetting Checklist (PDF)

Key facts before you shortlist

• A Canadian company is not the same as a Canadian factory. Nine of the twelve companies below have a Canadian manufacturing footprint; three sell in Canada without publicly disclosing Canadian production.
• Confirmed Canadian manufacturing in this list: Canaan Site Furnishings (Markham, ON), Hauser Site (Waterloo, ON), C.R. Plastics (Stratford, ON), MJB (Brossard, QC), Dodeka (Metchosin, BC), Krahn Outdoor (Eden, ON), Cuscini Design (Mirabel, QC), Leisurecraft (Melancthon, ON) and Produits Re-Plast (Notre-Dame-du-Bon-Conseil, QC).
• A domestic quote and an imported container are only comparable when both are priced delivered and duty-paid.
• Municipal site furniture and residential patio sets are different supply chains, with different buyers and different performance standards.
• Contract-grade outdoor furniture is judged on the powder-coat system, salt-spray hours, UV hours and warranty length, not on catalogue images.
• Amisco makes indoor metal furniture, and its own warranty voids coverage on sunlight and rain exposure.
• Quebec retail requires French-language labelling. Verify it before a purchase order ships into Quebec.

How this list was built

Every company was assessed on the same five dimensions: product-category fit, evidence of manufacturing location, material and finish disclosure, customisation depth, and suitability for commercial or project work.

Evidence type is stated for each company. Where no plant visit has been made, the entry says desk research only and names the sources used. Where a company publishes a plant address or a production claim, that claim is reported as the company’s own statement, not as our verification. Nothing on this page should be treated as a substitute for your own audit, and the manufacturer’s own production process documentation is the record that matters.

At a glance: 12 companies, three groups

Group A — Canadian manufacturing footprint (9)

Group B — Canada-serving resellers and importers (3)

Group C — commonly mistaken for Canadian manufacturers (3, not counted above)

Group A: Canadian manufacturing footprint

1. Canaan Site Furnishings: Best for Municipal and Campus Site Furniture

• Makes. Canada plant, Markham, Ontario. Company website and public corporate records. Desk research only. Verified 2026-09-24.
• Best for. Parks, campuses, transit stops and public terraces specifying heavy-duty site furniture.
• Not for. Fast stock replenishment or low-MOQ residential patio programmes.
• Next step. Request written finish specifications, test reports and project minimums before shortlisting, then confirm radius-bench lead times against your site drawings.

Municipalities, campuses, mixed-use developers and hospitality buyers need contract-grade site furniture rather than residential patio sets. Canaan builds heavy-duty benches and site seating, including recycled plastic lumber and custom radius and curved runs that solve awkward plaza layouts.

We treat Canaan as a genuine Canadian manufacturer for public-realm projects. If your scope includes site amenities, compare outdoor furniture, outdoor structures and outdoor storage.

Procurement reality check: do not award on catalogue images. Ask for finish specifications on coated metals, and confirm public-use test results for park benches. Clarify installation details for radius benches, and check MOQ and project minimums, because several Canadian suppliers quote low consumer minimums and then push higher ones for custom commercial work.

Contact Canaan Site Furnishings

2. Hauser Site: Best for Contract-Grade Hospitality Outdoor Furniture

• Makes. Canada plant, Waterloo, Ontario. Company website and published finish documentation. Desk research only. Verified 2026-09-24.
• Best for. Hotel courtyards, condo amenity decks and public-sector projects that must survive freeze-thaw and salt air.
• Not for. Buyers who need the fastest lead time or the lowest unit price.
• Next step. Ask for salt-spray hours and warranty length per collection before you award, and use our durability testing guide and quality testing methods to compare the answers.

Hospitality courtyards and condo amenity decks punish flimsy residential sets. Restaurants and public-sector buyers need furniture that survives freeze-thaw cycles, salt air and daily use.

Hauser’s published advantage is finish disclosure rather than catalogue breadth. Frames move through white-metal blasting, a multi-stage pre-treatment, and a UV-stable polyester powder coating system, and the company names its coating and its recycled HDPE slat material rather than describing them generically. That sequence is why a properly specified frame resists corrosion better than an unlisted import. See our quality control checklist before you compare suppliers.

Buyers should demand ASTM B117 salt-spray hours test reports. For coastal resort patios we require one thousand chamber hours, and we also ask for UV stability data, because that combination is what shows the coat will not peel. Hauser is not the fastest supplier. For legacy contract work, the disclosures are what you are paying for.

Contact Hauser Site

3. C.R. Plastics: Best for Commercial-Grade Recycled Plastic Furniture

• Makes. Canada plant, Stratford, Ontario. Company website, public company records and trade press. Desk research only. Verified 2026-09-24.
• Best for. High-traffic commercial and hospitality settings that must tolerate year-round outdoor exposure with minimal maintenance.
• Not for. Design-led briefs that need timber, teak or woven finishes.
• Next step. Ask which collections are specified for commercial rather than consumer use, and request UV and colour-fade data for dark colours.

C.R. Plastics manufactures outdoor furniture from post-consumer and post-industrial recycled polyethylene, extruded into plastic lumber with an automotive-grade UV stabiliser. The company runs a 300,000 sq ft facility in Stratford, Ontario, was founded in 1994, and sells into commercial and hospitality markets as well as consumer retail, which puts it in a different category from a residential poly brand that happens to accept a hotel order.

Its materials do not rot, splinter or crack, and they can stay outside year-round without painting or staining, which is why poly performs well on hotel pool decks and restaurant patios where refinishing is impractical. The material also sets the constraint: if your design language needs timber warmth or woven texture, this is not the supplier for that range.

4. MJB (Meubles de Jardin Brossard): Best for Canadian Red Cedar Outdoor Furniture

• Makes. Canada plant, Brossard, Quebec. The company states that its furniture is manufactured in its own workshops with no intermediaries. Company website and public records. Desk research only. Verified 2026-09-24.
• Best for. Cedar-led residential, boutique hospitality and garden retail ranges where joinery quality and local production matter.
• Not for. Aluminium, woven or large-volume container programmes.
• Next step. Confirm the cedar grade and the finish system, then ask what maintenance interval the company specifies for your climate.

MJB has been a family woodworking business since 1969 and builds outdoor furniture in Canadian red cedar, a species that naturally resists rot, weather and insects and is often specified on a twenty to thirty-year service expectation. The range covers Adirondack seating, dining sets, swings, hammock beds, modular sofas, arbors, planters and picnic tables, with Sunbrella cushions offered on several lines.

Because production sits in one Quebec workshop rather than a distributed supply chain, the practical questions are capacity and delivery radius rather than origin. Ask for the lead time at your peak month, and confirm how far the company will deliver and install.

5. Dodeka: Best for Custom Design-Led Hospitality Pieces

• Makes. Canada plant, Metchosin and Victoria, British Columbia. Company website and published specification lists. Desk research only. Verified 2026-09-24.
• Best for. Rooftop, courtyard and branded-space projects where made-to-size pieces matter more than catalogue SKUs.
• Not for. Fast turns, thin budgets, or repeatable container-volume programmes.
• Next step. Confirm the sampling workflow, upholstery specification and site power requirements before you sign, and verify heated-seat electrical specifications in writing.

Design firms and boutique hotels rarely need another catalogue SKU. They need pieces made to size for a rooftop or a branded courtyard, which is the brief Dodeka builds for, working with premium resorts, developers and design-led hospitality groups from a base on Vancouver Island.

The published specification list is what separates Dodeka from a mass import: thick-walled powder-coated aluminium frames, quick-dry reticulated foam, named fabric options such as Sunbrella and Serge Ferrari, BC red cedar accents and 3FORM tabletops. Cold-climate shoulder-season operation is addressed with integrated heated seats or cushions, a feature that only makes sense when the electrical and installation details are properly specified.

Procurement reality check: expect premium pricing and longer custom development cycles. Confirm sampling workflow, upholstery specifications and installation conditions before you sign, and compare aluminium vs. teak and sustainable materials so the brief is set before the quote.

Contact Dodeka

6. Krahn Outdoor: Best for Recycled Poly Built for Harsh Canadian Winters

• Makes. Canada plant, Eden, Ontario. Company website, dealer network and public records. Desk research only. Verified 2026-09-24.
• Best for. Quick-service restaurant patios, condo amenity decks and sites where winter survival and low maintenance outrank design.
• Not for. Luxury teak or woven-rattan specification work.
• Next step. Verify fade data and the lead time at the specific dealer channel you would buy through, not the national average.

Buyers prioritising winter survival and low maintenance should look hard at Krahn Outdoor, the clearest year-round poly specialist in this list. The company has operated since 1986 and sells through a dealer network rather than directly, which means availability and lead time vary by location.

Krahn blends heavy UV stabilisers into recycled HDPE resin, an additive package intended to limit winter colour fading, and uses marine-grade 316 hardware so that fasteners do not rust under highway salt. Custom colours are moulded rather than painted, and the company backs the furniture with a ten-year manufacturer warranty.

Before you commit, compare sustainable outdoor furniture materials. Two constraints matter: Krahn sells through dealers rather than from a factory line, and the look is clean poly rather than luxury teak or woven rattan, which limits design-led hospitality specifications. Our outdoor furniture material costs and rattan weaving process guides explain the contrast for mixed-material briefs.

Contact Krahn Outdoor

7. Cuscini Design: Best for Hospitality Terraces and Shade Structures

• Makes. Canada plant, Mirabel, Quebec. Company website and published product documentation. Desk research only. Verified 2026-09-24.
• Best for. Restaurant and hotel terraces that need a retractable-roof or pavilion system alongside furniture.
• Not for. Buyers sourcing furniture alone with no structural or shade requirement.
• Next step. Ask for the structural and anchoring specification, the wind and snow ratings, and who holds the installation responsibility.

Cuscini Design is a Quebec designer and manufacturer, founded in 1988, whose line combines Canadian-made patio furniture with garden pavilions, cabanas and cushions. Its multi-pavilion system with retractable roofs was developed specifically for the hospitality and restaurant industry, and the company supports commercial and residential terraces for dining, living and event use.

The structural element is the differentiator. A retractable-roof terrace is a building element with wind and snow loads, anchoring requirements and an installation responsibility, not a piece of furniture with a shade on top. Bring your structural questions to the first meeting.

For shade and structure sourcing more broadly, review outdoor structures, and for furniture-only specifications compare outdoor loungers and patio bar ranges.

8. Leisurecraft: Best for Solid-Wood Ranges Sold Through the Trade

• Makes. Canada plant, Melancthon (formerly Dundalk), Ontario. Company website and published product documentation. Desk research only. Verified 2026-09-24.
• Best for. Retail chains and dealers buying trade-only, and rustic solid-wood ranges for resort, campground and leisure settings.
• Not for. Aluminium, woven or recycled-plastic specifications, or a furniture-only catalogue.
• Next step. Confirm that the specific SKUs you need are produced in-house rather than assembled from bought-in components, and check the seasonal cut-off dates before you commit.

Leisurecraft is a family-owned Canadian manufacturer founded in 2004, which began by building cedar outdoor furniture and now makes a wider outdoor-living range: saunas, cold plunges, hot tubs and outdoor showers alongside rustic solid-wood furniture in cedar, pine and maple, plus tiki bars and gazebos. The company operates six manufacturing buildings from a base on the 8th Line in Melancthon, Ontario.

Outdoor furniture is one line inside that range rather than the whole catalogue, so the vetting question shifts slightly: ask which furniture lines are built in-house, and how far the outdoor range extends beyond the solid-wood pieces you can see. The purchasing model is the other reason it belongs on a procurement list rather than a consumer one, because it sells only to the trade, supplying retailers and dealers across Canada, the United States and Europe. That means you are buying at wholesale and reselling, so line availability, replacement-part supply and seasonal cut-off dates matter more than brand marketing.

9. Produits Re-Plast: Best for Municipal Recycled-Plastic Site Furniture

• Makes. Canada plant, Notre-Dame-du-Bon-Conseil, Quebec. Company website, public records and federal procurement records. Desk research only. Verified 2026-09-24.
• Best for. Municipalities, parks departments and public-realm projects specifying recycled-plastic site furniture and decking.
• Not for. Hospitality or retail ranges that need cushions, sling or woven finishes.
• Next step. Confirm the recycled-content percentage and the colour-fastness data, and ask which products carry a current public-sector supply reference.

Produits Re-Plast has designed and manufactured in Centre-du-Quebec since 1989, making urban furniture such as park benches, picnic tables, planters and waste bins, plus decking and boards, from post-consumer and post-industrial recycled plastic. Boards are marketed under the Perma-Deck and Advantage+ names, and the raw material stream includes recycled plastic containers and bags; the company has publicly documented turning recovered election signs into park benches.

It competes with timber rather than with imported furniture, and federal procurement records list contracts awarded under the company name, which matters if your project needs a supplier with public-sector references. The category limit is real: this is structure-and-site furniture in moulded plastic lumber, not seating built for cushions or woven finishes, so it complements rather than replaces a hospitality supplier on a mixed public-realm scheme.

Group B: Canada-serving resellers and importers

None of the three companies below publicly discloses Canadian manufacturing. They are included because procurement teams meet them constantly in Canada, often under a manufacturing-sounding brand, and because each is genuinely useful as a supply partner. Treat each as a channel decision rather than a factory decision.

10. Casualife Outdoor Living: Best for Showroom-Led Material Selection in Ontario

• Makes. No Canadian production disclosed. Ontario showroom and finishing operation. Company website and published company history. Desk research only. Verified 2026-09-24.
• Best for. Comparing cushion, fabric and frame options side by side before committing to a specification.
• Not for. Buyers who need a pure OEM factory for volume private-label production.
• Next step. Request a private-label capability sheet and confirm factory depth in writing before comparing quotes.

Hospitality buyers and design partners should shortlist Casualife when material feel matters more than unit price. The company has served Ontario for more than 45 years as a retailer, designer and manufacturer hybrid, and its showroom lets you compare marine-grade aluminium, locally made cushions, named outdoor fabrics, synthetic wicker, teak, sling, and powder-coated wrought iron or aluminium side by side. That hands-on comparison is genuinely useful for patio sofa, patio chair and outdoor lounger packages.

Local cushion work is a real advantage, because foam density and quick-dry cores can be specified without shipping overseas. Do not mistake this for a pure OEM factory, though. The strength is showroom selection and finishing support, and some buyers assume deeper production than exists.

Contact Casualife Outdoor Living

11. PC Outdoor: Best for Category Breadth and Canada-Wide Fulfilment

• Makes. No Canadian production disclosed. National warehouse and distribution network. Company website and company statements. Desk research only. Verified 2026-09-24.
• Best for. Multi-category patio rollouts across several sites that need one account and reliable replenishment.
• Not for. Buyers who need factory-level engineering or deep private-label development.
• Next step. Ask for the manufacturing origin and testing standards per SKU, and request one account manager for dining, lounge and shade lines.

Hotels, restaurants, property developers and retailers often want one supplier for the whole patio, and PC Outdoor fits that model. This family-operated Canadian business sells residential and commercial-grade pieces across dining sets, sectionals, conversation sets, lounge armchairs, chaise lounges, umbrellas and replacement parts, and its national logistics network supports multi-site orders.

Service breadth is the advantage: a buyer can source several categories from one account, the outdoor chair range works for dining or lounge layouts, replacement parts extend product life, and our outdoor living trends guide helps shape a seasonal mix.

The caveat is that breadth is not disclosure. Ask for manufacturing origin, testing standards from bodies such as BIFMA or CSA Group, the stock-versus-custom split, and the depth of project support before a hotel or condo purchase order.

Contact PC Outdoor

12. ARD Outdoor: Best for Premium Hospitality Showroom Buying in Toronto

• Makes. No Canadian production disclosed. 13,000 sq ft Toronto showroom. Company website and published showroom information. Desk research only. Verified 2026-09-24.
• Best for. Design teams that need to see and touch premium outdoor groups before specifying.
• Not for. Buyers who require factory-specification disclosure or direct mill pricing.
• Next step. Verify manufacturing depth, contract-grade certifications, replacement-part programmes and warranty terms before you finalise the purchase order.

Luxury hotel designers, restaurant owners and retail buyers usually need to see premium outdoor groups in person before committing, and ARD Outdoor’s 13,000 sq ft Toronto showroom supports that. The floor carries sectionals, dining sets, chaise lounges, chat tables, daybeds, fire tables, planters and Tuuci shade solutions, which lets you test grouping scale and finish quality across patio sofa, patio chair and patio bar layouts.

ARD positions itself as a long-standing Canadian manufacturer and retailer, but it keeps production sources private. That is the difference to price in: strong design value on the showroom floor, and no factory-specification disclosure to audit. Verify manufacturing depth, certifications, replacement parts and warranty terms before awarding.

Contact ARD Outdoor

Group C: commonly mistaken for Canadian outdoor manufacturers

Amisco: A Canadian Furniture Manufacturer, but Not an Outdoor One

• Makes. Quebec, Canada. Indoor residential and commercial furniture. Company website and published warranty documentation. Desk research only. Verified 2026-09-24.
• Best for. Indoor companion pieces for a hotel lobby or private dining room.
• Not for. Covered patios, pool decks or restaurant terraces.
• Next step. Read the indoor warranty language before any purchase order, and keep Amisco out of your outdoor supplier list.

Amisco is a respected Canadian furniture maker and a common false positive on outdoor sourcing lists. It is not an outdoor furniture manufacturer. The Quebec operation focuses on indoor residential and commercial furniture, such as dining chairs, bar stools and tables, and its published warranty documentation excludes sunlight and rain exposure, which rules it out for covered patios, pool decks or terraces.

Including it here is deliberate: it is the name most often added to a Canadian outdoor shortlist by mistake. If you need indoor companion pieces for a lobby or private dining room, it fits. For outdoor procurement, compare real suppliers instead, starting with the outdoor furniture manufacturers USA list and our guide to choosing an outdoor furniture supplier, then map the direct OEM supply chain if you want factory-level control.

Contact Amisco

Kingsley Bate is a premium teak spec brand serving North America, with hospitality-grade teak joinery, but it does not claim Canadian manufacturing, and its prestige should not be confused with local production. Les Jardins is a Canada-market luxury outdoor line with design-led aluminium and mixed-material collections; origin varies by collection, so request powder-coat and UV files per SKU rather than assuming domestic production.

What Canadian buyers should verify first

Canada adds requirements that a European or Mediterranean specification never captures. Work through these before you shortlist, and put each answer on the specification sheet rather than the packing list.

• Origin claim. “Made in Canada” and “Product of Canada” are defined cost claims, not marketing lines. Ask how the supplier substantiates the one it uses, and treat “Canadian-owned” as an answer to a different question.
• Freeze-thaw, salt and UV. Request salt-spray hours per coated component, powder-coat thickness in microns, UV exposure hours on the actual resin and pigment, and freeze-thaw cycle data on joints and welds.
• Certification held by the right entity. Confirm that any CSA or ULC mark names the manufacturing entity, and that the certificate number can be verified at source rather than accepted as a scanned logo.
• Quebec language law. French obligations come from the Charter of the French Language, tightened by Bill 96, whose product-labelling rules took effect on 1 June 2025. Inscriptions on the product, its packaging, instructions and warranty certificate must be in French, and no other language may be more prominent. A recognised trademark may stay in another language, but any generic or descriptive word inside it must appear in French. Safety information must be in French even where the marking is permanently applied to goods made outside Quebec. Stock manufactured before 1 June 2025 may be sold until 1 June 2027, so put French artwork into the print order rather than adding it after the container lands.
• Snow load. Any load-bearing structure, such as a pergola or gazebo, carries a snow load as well as a wind load. Ask for the rating.
• Landed cost. Compare a domestic quote and an imported container delivered and duty-paid. Unit price alone is not a comparison.

Canadian factory or imported container: the landed-cost comparison

The ex-works price gap is the number buyers quote to each other, and it is the least useful one. Once freight, duty, brokerage, damage and the cost of capital sit on the same line, the gap narrows sharply and sometimes inverts. Our cost optimisation framework works through the same lines.

Indicative index for a typical mixed outdoor furniture container, not a quote or a price list. Freight, duty and damage vary by cube, HS code and origin, and in some categories the difference closes entirely once replacements and the cost of capital are counted. Confirm duty treatment with a customs broker, and price both routes to the shelf, before you decide.

Comparing origins? Our China vs Vietnam suppliers guide covers the sourcing-route decision, and the outdoor furniture consolidation programme covers the other half of landed cost.

Lead time and minimum order: indicative planning ranges

Buyers ask two questions the profiles cannot answer on their own, because they depend on your specification rather than the supplier’s address. The ranges below are planning markers, not quotes.

Two planning facts matter more than any single number. Peak season is real: ocean transit can stretch by three to seven days between August and October, and garden-retail production slots fill early in the year, so a spring launch is decided the previous autumn. And the end-to-end cycle for a sampled, inspected imported order is roughly three to four months from enquiry to warehouse, which is the figure to put against a domestic quote that can ship in weeks.

Get the vetting checklist

We put the six Canada gates into a printable file: separate the origin claim from the factory, verify the entity and the plant, test for the Canadian climate, demand the compliance file, lock the commercial terms, and price the landed cost.

Download the Canada Supplier Vetting Checklist

People Also Ask About Outdoor Furniture Manufacturers Canada

1. Which names are true outdoor furniture manufacturers in Canada versus hybrids, dealers or storefront-led sellers?

Canaan Site Furnishings, Hauser Site, C.R. Plastics, MJB, Dodeka, Krahn Outdoor, Cuscini Design, Leisurecraft and Produits Re-Plast have a Canadian manufacturing footprint based on their published plant addresses and production claims. Casualife, PC Outdoor and ARD mix showrooms with some local finishing but do not disclose Canadian production. Amisco makes indoor furniture only.

2. Which companies fit custom patio furniture, contract-grade hospitality or winter durability work?

Dodeka leads custom premium work for design-led hospitality. Hauser fits contract-grade hospitality and public projects, and Cuscini Design covers hospitality terraces that need shade structures as well as furniture. Canaan supplies site furnishings for municipalities and campuses, C.R. Plastics covers high-traffic commercial settings in recycled plastic, and Krahn performs best in harsh Canadian weather with recycled HDPE poly.

3. How do you verify a Made in Canada claim on outdoor furniture?

Ask the supplier how it substantiates the claim. Canadian origin labelling is based on defined cost thresholds and on where the last substantial transformation happens, so request the cost breakdown or substantiation file alongside the plant address. A company can be fully Canadian and still import 100% of its product, and “Canadian-owned” is not a manufacturing statement. The Competition Bureau publishes the current test.

4. For a multi-site hotel renovation, when should you buy from a Canadian factory rather than an imported container?

Buy domestically when the schedule is short, when the specification needs custom dimensions or finishes, when you need local service and replacement parts during the season, or when a client requires a Canadian origin claim. Import when the design is repeatable, quantities are large enough to justify a full container, and you can absorb a longer lead time in exchange for a lower landed cost. Price both delivered and duty-paid before deciding.

5. What should a buyer verify before sending a deposit?

Before issuing any purchase order, verify the factory audit status, finish specifications, test reports, MOQ, sample timeline, warranty coverage, country of origin per SKU, and spare-parts availability. Strong suppliers can back up their claims with documented quality control and testing evidence. If a manufacturer cannot provide clear written test data, pause the conversation.

Where to go next

Looking beyond Canada? Compare our vetted rankings for outdoor furniture manufacturers UK, Australia and China.

Within this site, the most useful companion reads for a Canadian brief are our product sourcing framework, the guide to choosing an outdoor furniture supplier, and the private-label outdoor brand launch programme if you are building your own range rather than buying stock.

Conclusion

Commercial buyers should look past glossy catalogues and the word “Canadian”. A factory gives you direct control over welding, coating and custom builds. An importer, dealer or showroom gives you stock, service and speed, and there is nothing wrong with either model as long as you know which one you are buying from and price it accordingly.

If you are sourcing outdoor furniture for a hotel, restaurant, commercial development, public-space project or private-label programme, OGPSGroup can help you identify suitable suppliers, evaluate factory and supply-chain capability, compare materials and testing standards, and build a procurement strategy around your project requirements, rather than sending you back to a long list of unverified names.

Contact OGPSGroup for outdoor furniture supplier selection and sourcing support, and start your next project with the right supplier.