Procurement teams searching outdoor furniture manufacturers Australia mostly get a directory of brands, not a list of factories. The two are not the same thing. A company can be Australian-owned, warehouse in Sydney, and still manufacture every frame overseas — and the difference decides your lead time, your landed cost and who owns the warranty.
This page separates them. It sorts nine commercial companies into those with a verified Australian manufacturing footprint, those that sell into Australia without publicly disclosing one, and the import route that warehouses here. Every entry carries the same checks: where it makes, what it specifies, and what to verify before a purchase order. It then profiles three more manufacturers for civic buyers, whose requirements are different enough to sit in their own section. For the categories and materials involved, our outdoor furniture hub goes wider.
Disclosure. OGPSGroup is an outdoor furniture manufacturer and sourcing group based in Guangdong, China. This page helps buyers tell Australian factories apart from Australian-facing brands, distributors and importers. No company listed here paid for inclusion, and nothing here replaces your own factory audit. Manufacturers may submit plant addresses and test documents for correction.
If you would rather run the checks before reading the profiles, our six-gate vetting checklist is a printable PDF.
Download the pre-PO vetting checklist (PDF)
Key facts before you shortlist
- An Australian brand is not an Australian factory. Of the nine companies below, three publish an Australian plant address, five sell into Australia without one, and one manufactures overseas and warehouses here.
- Confirmed Australian production in the commercial shortlist: Tait (Thomastown, Victoria), JARDAN (Scoresby, Victoria) and The Australian Garden Furniture Co (Geebung, Queensland). A further three Australian manufacturers — Park Furniture Australia, Astra Street Furniture and Woodpecker Project — are profiled for civic buyers at the end of this page.
- Distributors carry design language you cannot source locally. Classic With A Twist holds Fermob, Tectona and Sika Design; Cosh Living holds Tribu, Dedon and Atelier Vierkant.
- Contract-grade outdoor furniture is judged on the powder-coat system, salt-spray hours, UV hours and warranty exclusions, not on catalogue images.
- A domestic quote and an imported container are only comparable when both are priced delivered and duty-paid.
How this list was built
Every company was assessed on the same five dimensions: product-category fit, evidence of manufacturing location, material and finish disclosure, channel structure, and suitability for commercial or project work.
Evidence type is stated for each entry. Where no plant visit has been made, the entry says desk research only and names the sources used. Where a company publishes a plant address or a production claim, that claim is reported as the company’s own statement, not as our verification. Nothing on this page should be treated as a substitute for your own audit, and the manufacturer’s own production process documentation is the record that matters.
At a glance: the 9-company commercial shortlist
Council, school and public-realm buyers: your three suppliers are in the civic and street furniture section at the end of this page.
| # | Company | Where it makes | State | Lead time band | Best for |
|---|---|---|---|---|---|
| 1 | Tait | Own factory | VIC | 4–6 weeks | Hospitality, rooftop, courtyard |
| 2 | JARDAN | Own factory | VIC | Made to order | Design-led residential and boutique |
| 3 | The Australian Garden Furniture Co | Own workshop | QLD | Project-based | Dining zones, clubs, civic venues |
| 4 | King Living | Not published | National | Trade channel | Hotels, resorts, developments |
| 5 | Satara | Not published | National | Per collection | Resorts, villas, lounge zones |
| 6 | Cosh Living | Distributor only | VIC | Imported | Premium European design groups |
| 7 | Classic With A Twist | Distributor only | VIC | Up to 12 weeks | Design-led hospitality |
| 8 | Remarkable Outdoor Living | Not published | National | Per line | Multi-zone hospitality fit-outs |
| 9 | LUXUS Home Furniture | Overseas, AU warehouse | NSW | Per order | East-coast teak, light hospitality |
Group A: Verified Australian manufacturing
These three publish a plant address and a production claim in Australia. Confirm each claim on your project specification rather than treating this page as verification — a domestic address is a location fact, not a performance result.
1. Tait: Best for Australian-made hospitality frames
The plant. Tait Enterprises Pty Limited, family-owned and founded in 1992, manufactures at 1 Milne Street, Thomastown, Victoria 3074, with a separate showroom at Fitzroy. Company statements and its own ESG statement; desk research only.
The specification. Aluminium frames in woven rope, sling or timber, with upholstery and porcelain or glass-reinforced concrete tops. Request the AS 3715 film thickness on coated frames — Australian orders placed after 1 July 2025 carry a 10-year structural warranty, so read what it excludes.
Why buyers shortlist it. Contemporary hospitality, rooftop and courtyard projects that want a configurable Australian-made frame, on a 4 to 6 week manufacturing lead time. It is not the answer for off-the-shelf stock or buyers shopping on unit price alone.
Check the claim per SKU. The company states 95% of products are manufactured in Melbourne. The remainder includes porcelain from Spain, textiles from Italy and the United States, and glass-reinforced concrete from Indonesia.
2. JARDAN: Best for specifier documentation
The factory. Jardan Australia Pty Ltd, founded in 1987 and family-owned since 1997, manufactures at 1314 Ferntree Gully Road, Scoresby VIC 3179 — roughly 16,000 sq m holding head office, design studio and production. PEFC Chain of Custody BVAU-PEFC-COC-020, valid to March 2030. Company statements and public certification records; desk research only.
Where it wins. Documentation. Request the PDF specs plus the Revit and 2D CAD files published on select product pages, and they can go straight into a drawing set — depth most brands on this list do not offer. Everything is made to order.
The scope limit. Outdoor is one line inside a catalogue still led by indoor furniture, so confirm the pieces you need are produced at Scoresby rather than sourced in. Ask for the PEFC certificate and the timber species per SKU, and for the coating system on any outdoor metal component.
Not for. Fast dispatch, or briefs that are entirely outdoor.
3. The Australian Garden Furniture Co: Best for heavy-duty timber settings
The workshop. A Brisbane timber maker at Unit 27/344 Bilsen Road, Geebung QLD 4034. Company website and public business records; desk research only.
What it builds. A-grade Kwila and Rosewood with visible, heavy stainless steel fixings — furniture for dining zones, clubs and civic venues, where strength matters more than soft-lounge styling. This is not a design-led lounge brief.
What to check. Ask for the stainless grade, 316 against 304, and for timber treatment and biosecurity documentation before shipping. Lead time is project-based, so confirm it at your project month rather than on an annual average.
The caveat. Published project-service detail is thinner than JARDAN’s or King Living’s. Ask for a written maintenance schedule — Kwila bleeds tannins and weathers grey unless it is sealed yearly — plus stainless grade certificates.
Contact The Australian Garden Furniture Co
Group B: Australia-serving brands, distributors and retailers
None of the five companies below gives you an Australian factory floor as the primary reason to buy. They are included because procurement teams meet them constantly in the Australian market, often under a manufacturing-sounding brand, and each is genuinely useful as a supply, design or coordination route. Treat each as a channel decision rather than a factory decision.
4. King Living: Best for premium commercial outdoor systems
The brand. King Living — its consumer site is kingfurniture.com.au, and trade business runs through King Trade & Commercial.
What is published. Aluminium frames, stainless steel hardware, performance fabric and ceramic tops. No plant address appears on the consumer site, and showrooms are national rather than a factory, so confirm the manufacturing origin per collection through the trade channel. Desk research only.
On corrosion. Confirm the stainless grade per collection rather than assuming 316. Marine-grade stainless resists pitting in coastal salt, as ASSDA guidance sets out.
Where it fits. Hotels, resorts and property developments where design credibility with architects and consultants matters — and not cost-led sourcing programmes. Ask for configuration options, lead times, ceramic-top replacement cost and the frame warranty in writing. Do not rely on the consumer website for any of them.
5. Satara: Best for resort-style luxury outdoor spaces
The offering. Showrooms in Melbourne, Brisbane, Sydney, Adelaide and Perth, with reclaimed teak, woven rope, powder-coated aluminium frames and ceramic or stone tops. No plant address is published, so establish the manufacturing origin per collection. Desk research only.
The cushion maths. Request AS 3715 powder-coat figures and cushion foam density. You need at least 30 kg/m3 for commercial seat cushions, because low density flattens over a season of guest use.
Where it fits. Resorts, villas and lounge-heavy guest zones that want relaxed styling without losing structure. Not for buyers who need published plant evidence before they can shortlist.
What to ask. Do not work from the lifestyle presentation alone. Ask for foam density, finish specifications and a maintenance schedule for teak and stone, then confirm the lead time per collection.
6. Cosh Living: Best for comparing premium European groups in person
What it is. A retailer and distributor, not a manufacturer. Melbourne-founded in 2008 and family-owned, with showrooms including 600 Church Street, Richmond VIC 3121, plus Cheltenham, Sydney, Brisbane, Perth and Geelong. Company website; desk research only.
What it carries. European houses — Tribu, Dedon, Atelier Vierkant and Jardinico for outdoor, alongside the company’s own Australian indoor brand Kett. Imported collections carry ocean freight on top of manufacturing, so confirm the lead time per brand.
What to check. Origin varies by brand, so request the country of manufacture per collection, and AS 3715 or equivalent coating data on any aluminium frame. Then confirm who owns the warranty claim when the factory sits overseas.
Where it fits. Design teams that need to see and compare premium outdoor groups side by side before specifying. Not for factory-level pricing, a custom mould, or a blanket single-origin statement.
7. Classic With A Twist: Best for design-led hospitality briefs
The model. A Melbourne distributor, not a manufacturer. The trade desk holds Fermob (France), Tectona (France) and Sika Design (Denmark). Company website; desk research only.
What that means for a spec. Powder-coated steel and aluminium, teak, rattan and synthetic weave — European design language you cannot source locally. European products do not automatically carry Australian certifications, so confirm AS 3715 or equivalent coating data and ask whether any range carries AFRDI testing.
The lead time. Reported to stretch to around 12 weeks. Lock finish codes early, and treat this as a distribution model rather than a factory-direct source.
Where it fits. Design-led hospitality briefs where a European design language decides the order — not buyers who need a factory-direct route or a short lead time. Ask who handles warranty claims locally.
8. Remarkable Outdoor Living: Best for multi-zone hospitality fit-outs
The catalogue. Aluminium and sling fabric across modular lounges, dining sets and cafe settings — hotel pools, spa courtyards, cafe terraces and mixed-use projects that need consistent design across several zones.
The unresolved question. No plant address is published, and a catalogue this broad across categories usually means a mix of import and distribution. Establish where each line is made. Desk research only.
The compliance angle. Ask for AFRDI or equivalent commercial-grade testing, and confirm how warranty is handled under Australian Consumer Law.
Where it fits. Buyers who want one supplier across zones, not buyers who need a single factory with a published plant address. Ask for a line-by-line supplier role and the restock lead time — replenishment predictability is the real risk in a broad catalogue, not the first order.
Contact Remarkable Outdoor Living
Group C: Australian warehouse, overseas manufacturing
9. LUXUS Home Furniture: Best for east-coast teak with local dispatch
Who they are. A United Kingdom company. The Australian arm trades as Luxus Home and Garden AU; the parent is Luxus Projects Ltd (UK company number 13325600), founded in Stratford-upon-Avon.
Where it is made. There is no Australian manufacturing. Head office, storage and despatch sit at 100 George St, Parramatta NSW 2150, and the furniture is manufactured in Indonesia from certified teak (FLEGT and SVLK). Company website and public company records; desk research only.
Delivery. Free over $499 within 75 km of Sydney, and $99 within 75 km of Melbourne, Brisbane and Canberra. Confirm the manufacturing lead time at your project month.
The caveat. Price the landed cost, not the list price. Third-party review ratings for the Australian arm are mixed — Trustpilot rates it “Average” — with complaints about delivery timing and unexpected landed fees, so get the full landed figure and the delivery window in writing. Timber import biosecurity treatment documentation applies, so ask for the certification chain per shipment. Not for buyers who need Australian-made, contract-grade furniture or a published Australian factory address.
Civic and street furniture: three more Australian manufacturers
These three are not in the shortlist above because they sell to a different buyer. Councils, schools and public-realm projects buy on function, vandal resistance and local-content rules rather than resort styling, and most council tenders require Australian-made content — a requirement the import route cannot meet. If your brief is a hotel, restaurant or residential terrace, the nine companies above are the relevant list and you can stop here.
10. Park Furniture Australia: Best for public-realm and coastal durability
The factory. A Capalaba, Queensland manufacturer at 15 Hook Street, Capalaba QLD 4157. Company website and public business records; desk research only.
The range. Aluminium — including a timber-look finish produced by sublimation — alongside ECOPLASWOOD, a recycled plastic composite. Councils, landscape architects, schools, aged care and transport precincts buy it for hard site seating and tables, not lounge-led resort styling.
What to confirm. The UV warranty and the traffic class, plus coating data on the aluminium range. Lead time varies between stock and made-to-order lines, so confirm per range.
The first decision. Which range the project actually needs — aluminium or recycled composite — and whether the installation is bolted-down or surface-mounted. Both change the quote.
Contact Park Furniture Australia
11. Astra Street Furniture: Best for councils, schools and civic precincts
The entity. A brand of the family-owned Area Safe Group; the operating entity is Area Safe Products Pty Ltd (ABN 74 114 414 185), out of Western Sydney. Company website and public company records; desk research only.
The materials. Aluminium slats, recycled composite Enviroslats, and PEFC or FSC certified hardwood with stainless steel fasteners. The company states the range is 100% Australian made and compliant with DDA and Australian Standards.
What to verify. The local-content certificate and the mounting specification, for the range you actually specify rather than the catalogue as a whole. Confirm the lead time per range.
Where it fits. Councils, schools, parks, campuses and commercial precincts buying for function, consistency and durability. Not for soft hospitality lounge settings, deep cushions or poolside styling.
Contact Astra Street Furniture
12. Woodpecker Project: Best for custom timber-and-steel fit-outs
Who they are. Woodpecker Project trades as Modernza Pty Ltd (ABN 57 658 288 307). The company was registered in March 2022 and the Woodpecker Project trading name in August 2024, which makes this a young workshop rather than an established maker. Company records and public business listings; desk research only.
Where and what. A workshop at 53A Merri Concourse, Campbellfield VIC 3061, building to custom site dimensions — heavy-duty picnic settings, communal tables and bar leaners in merbau, spotted gum or Tasmanian oak, on powder-coated galvanised steel frames.
What to check. Ask for the galvanizing coating weight against AS/NZS 4680 plus coating data on the steel frames, and confirm the lead time against your project month.
The caveat. You get flexibility and direct access to the maker, but there is no long multi-site delivery record to price against. Ask for a capacity calendar and a sample batch before signing a multi-site contract. Not for fast dispatch or large rollouts.
Australian climate and compliance: what to specify
Australia adds requirements a European or North American specification never captures. Work through these before you shortlist, and put each answer on the specification sheet rather than in a phone call.
- Powder-coat system. Request film thickness in microns measured against AS 3715, plus the pre-treatment sequence. Coating failures on Queensland balconies almost always trace back to this step being skipped.
- Salt spray. Ask for test data against ISO 9227 or an equivalent method, and read the hours rather than the word “marine”. Treat any unqualified “salt resistant” claim as unverified.
- Galvanizing. On steel frames and site furniture, ask for the coating weight against AS/NZS 4680. It is the standard a galvanized finish should be held to.
- Wind and snow loads. A pergola, umbrella or shade structure is a building element in Australia, not furniture with a canopy. Ask for the rating against AS/NZS 1170.2.
- Bushfire. Any structure in a designated bushfire-prone area carries an AS 3959 requirement. Establish the BAL rating before you specify.
- Commercial furniture testing. Ask for AFRDI or equivalent commercial-grade test reports and compare them against the supplier’s own claims.
- Hardware grade. Confirm 316 against 304 stainless, and hidden fixings. 316 costs more but survives salt air.
- Timber and biosecurity. For teak or kwila, demand treatment certificates and Australian biosecurity clearance. Offshore timbers add a compliance step a local species does not.
- Warranty and Australian Consumer Law. Consumer guarantees cannot be excluded, so ask which parts of the range the supplier treats as commercial-use rather than consumer-use, and what the warranty excludes either way.
- Verify the entity. Check the legal entity and ABN at ABN Lookup before you contract, then confirm the plant address matches.
Choosing between frame materials? Our aluminium vs teak comparison sets out the trade-offs for coastal and high-UV projects.
Australian factory or imported container: the landed-cost comparison
The ex-works price gap is the number buyers quote to each other, and it is the least useful one. Once freight, duty, brokerage, damage and the cost of capital sit on the same line, the gap narrows sharply and sometimes inverts. Our cost optimisation framework works through the same lines.
| Cost line | Australian factory | Imported container | What actually drives it |
|---|---|---|---|
| Ex-works unit price | Index 100 (baseline) | Index 55 to 75 | Volume, material and finish system |
| Inbound freight | Domestic LTL or FTL | Ocean freight, terminal handling and drayage | Cube, not weight. Furniture ships by volume |
| Duty | None on domestic goods | Often 0% under the China-Australia FTA, otherwise the MFN rate for the HS code | The origin declaration, not the supplier’s address |
| GST | 10% | 10% | 5% on some imports at the border, with the balance deferred — confirm the treatment with your broker |
| Brokerage and terminal | None | Fixed per shipment plus per-entry fees | Consolidated loads share the fixed cost |
| Damage and replacement reserve | 1 to 3% of order value | 3 to 8% of order value | Handling count and transit distance |
| Working capital | Roughly a 30 to 45 day cycle | Roughly a 90 to 150 day cycle | Payment terms against transit time |
| Indicated landed index | 100 | 70 to 95 | The landing gap is far smaller than the ex-works gap |
Indicative index for a typical mixed outdoor furniture container, not a quote or a price list. Freight, duty, GST and damage vary by cube, HS code and origin, and in some categories the difference closes entirely once replacements and the cost of capital are counted. Confirm duty and GST treatment with a customs broker, and price both routes to the shelf, before you decide.
What Australian buyers should verify first
- Origin claim. “Australian Made” is a licensed logo, not a marketing phrase. Ask which entity holds the licence and confirm the plant address matches the entity.
- Plant versus warehouse. A local distribution centre shortens lead time and does not change where the product was made. Confirm which one you are being offered.
- Coating and corrosion. Request powder-coat thickness in microns and salt-spray hours per coated component, plus UV hours on the actual resin and pigment.
- Replacement continuity. Get part numbers and a stocking commitment for slings, cushions, glides and hardware for the life of the asset.
- Warranty, and its exclusions. A 10-year frame warranty that excludes finish and cushions is a different offer from a 10-year product warranty. Read the exclusions.
- Landed cost. Compare a domestic quote and an imported container delivered and duty-paid. Unit price alone is not a comparison.
Comparing origins? Our China vs Vietnam suppliers guide covers the sourcing-route decision, and outdoor furniture quality testing methods sets out the reports to ask for.
Get the vetting checklist
We put the six pre-purchase gates into a printable file: lock the specification, verify the supplier, sign off the sample, inspect the line, approve the packaging, and check the load.
Download the pre-PO vetting checklist
People Also Ask About Outdoor Furniture Manufacturers Australia
1. Which Australian outdoor furniture manufacturers actually make their furniture in Australia?
Tait, JARDAN and The Australian Garden Furniture Co publish an Australian plant address and a production claim. King Living, Satara, Cosh Living, Classic With A Twist and Remarkable Outdoor Living sell into Australia without publicly disclosing an Australian plant, and LUXUS manufactures in Indonesia and warehouses in Sydney. Park Furniture Australia, Astra Street Furniture and Woodpecker Project are a separate group of Australian manufacturers serving civic buyers.
2. What should buyers ask before approving an Australian outdoor furniture supplier?
Ask five things. First, request AS 3715 powder-coat micron readings and salt-spray test data against ISO 9227. Second, confirm hardware grade, because 316 stainless costs more but survives salt air. Third, sign off physical samples before production. Fourth, lock lead times and warranty in writing, including exclusions. Fifth, confirm replacement-part availability. Suppliers that cannot produce test reports rarely last in coastal projects.
3. Is local Australian manufacturing always better than distributor or import-led sourcing?
Not always. Local manufacturing gives you control, faster design iterations and simpler warranty talks. But distributors like Classic With A Twist and Cosh Living unlock European design language you cannot source locally. Import-led routes win when the design is repeatable, quantities justify a full container, and you can absorb a longer lead time for a lower landed cost.
4. How do you verify an Australian-made claim on outdoor furniture?
Ask the supplier how it substantiates the claim, per SKU. Check the legal entity and ABN at ABN Lookup, then confirm that the plant address belongs to the same entity. A company can be fully Australian-owned and still import 100% of its product, and “Australian-owned” is not a manufacturing statement.
Where to go next
In the same vetted series:
- Outdoor furniture manufacturers USA
- Outdoor furniture manufacturers Canada
- Outdoor furniture manufacturers UK
- Outdoor furniture manufacturers China
Within this site, the most useful companion reads for an Australian brief are the guide to choosing an outdoor furniture supplier and the outdoor furniture factory audits checklist if you are qualifying a factory for the first time.
Conclusion
Commercial buyers should look past the word “Australian” and the catalogue photography that decorates it. A factory gives you direct control over welding, coating and custom builds. A distributor, brand or warehouse importer gives you design language, stock and speed, and there is nothing wrong with either model as long as you know which one you are buying from and price it accordingly.
If you are sourcing outdoor furniture for a hotel, restaurant, commercial development or private-label programme, OGPSGroup can help you identify suitable suppliers, evaluate factory and supply-chain capability, compare materials and testing standards, and build a procurement strategy around your project requirements, rather than sending you back to a long list of unverified names.
Start with product sourcing if you still need the factory found, or consolidation if you already have suppliers and need the freight arithmetic.
Contact OGPSGroup to scope either route.
- Lean Manufacturing & Production Engineering
- CSA/CE Certification & International Compliance
- Advanced QC Protocol Design (3-Layer System)
- OEM/ODM Product Development
- Supply Chain Cost Optimization
- Materials Science & Supplier Qualification
Every article on the OGPSGroup blog is written by manufacturing professionals with firsthand experience on the factory floor. Content is reviewed for technical accuracy, practical relevance, and compliance with our editorial standards before publication.
Learn more about our Fact Checking Process and Editorial Policy.
