Outdoor Loungers Manufacturer
Direct From Our Guangdong Factory.
$30–80 FOB. MOQ 200.
25-Day Lead.
Six lounger categories. 500+ frame SKUs on the shelf. TIG welding, QUV weathering, and salt-spray chambers under one roof. No broker. No "we'll check with the factory." We are the factory.
Six Ways to Sell a Lounger.
Pick Your Price Point.
Every category below ships from our own floor or a quarterly-audited Tier-1 line under our QC. Specs are real — material grades, test standards, load ratings.
Aluminum Frame Sun Loungers
6063-T5 aluminum. 5-position adjustable backrest. 60–120 micron powder coat. Stackable 4-high. 160 kg rated. Optional wheel kit.
PE Rattan Wicker Loungers
HDPE flat rattan, UV-8 compounded. 6063-T5 frame. 4.5mm weave profile. Quick-dry foam cushions. Deep reclined seating angle.
Sling / Textilene Pool Loungers
Textilene PVC-coated polyester sling. 1,500+ hr UV rating. Multi-position recline. 6063-T5 frame. Bartack-reinforced stress points.
Zero Gravity Reclining Loungers
Counter-balanced mechanism with locking levers. Textilene sling. Folds flat. 150 kg rated. Pairs with matching side table.
Rope / Cord Outdoor Loungers
Solution-dyed olefin rope. 6063-T5 frame. UV-stabilized, marine-grade colorfastness. Quick-dry cushions. Premium retail positioning.
Stackable Resin Chaise Lounges
Single-shot injection-molded PP shell. UV-stabilized, 1,500+ hr QUV tested. Integrated drainage channels. Stacks 6-high. 140 kg rated.
The Global Lounger Supply Chain
Is 50 Kilometers Wide.
Long-span extrusion, lounger-length weaving jigs, mechanism assembly, walk-in powder coating — every process within 50km. Thirty years of clustered investment. At $30–80 FOB, no other region comes close.
Guangdong produces the vast majority of the world's aluminum chaise lounges, rattan daybeds, and sling loungers. 600+ specialist factories with lounger-specific tooling built over three decades.
Extrusion in Dali. Weaving jigs in Lishui. Walk-in powder booths in Lecong. Sling cutting in Longjiang. Packaging in Shunde. Pawl sample: same day. Tube rebend: 48 hours.
Proven tooling for aluminum chaise profiles, rattan daybeds, zero-gravity chassis, and resin shell molds. Every mold stored under NNN protection with biannual audit. New geometry? Most clients modify an existing base frame rather than starting from zero.
We own the production floor — CNC benders, TIG cells, weaving looms, powder booths. Your invoice traces to BOM materials and factory labor. Average landed cost reduction vs. trading company: 22%.
Lounger frames flat-pack to 12cm. Stack above grills or fire pits as ballast in a single 40HQ. Per-unit freight drops 15–25% versus booking separate LCL shipments per category.
The Four Complaints We Hear
From Buyers Switching Suppliers.
Reclining Mechanism Failure
Stamped steel pawls strip after 200–300 adjustments. No bushing, no lubrication. Rust at pivots within 90 days. Return rate hits 12% by month 3.
304 stainless pawls with bronze bushings. Motorized cycle-tested to 10,000 adjustments. TIG-welded mounts with dye-penetrant inspection. 100% function-verified before packaging.
Poolside Corrosion
Chlorine + UV + humidity. Rust at welds within 6 months. Sling fabric loses 40% tensile strength in one pool season. Standard powder coat fails fast.
5-stage phosphate pre-treatment. 80–120 micron TGIC-free powder. Electrophoretic undercoat for saltwater proximity (1,500+ hr salt-spray). 304/316 stainless fasteners only. QUV-validated fabrics.
MOQ Too High / No Mix Flexibility
Factory demands 500 units per SKU. No color mixing. No frame-finish options. Can't pilot-test in 50 stores without committing to 3,000 units.
MOQ 200 per design. 50–100 unit pilot batches. Mix aluminum, rattan, and sling SKUs in one 40HQ. Mix colors and finishes within the same PO. Phased rollout supported.
Transit Damage on 200cm Frames
Lounger-length frame = long lever arm. Forklift bumps and container shifts bend mid-span tubes. Standard corner blocks fail. 10%+ transit damage on typical shipments.
Full-length spine boards. PE cradles at 3 stress points. ISTA 3A 17-drop tested with actual lounger model. Supervised container loading. Transit damage under 1%.
What "Quality" Actually Means
When You're Selling Loungers.
Poolside is brutal: chlorine, sunscreen, 10+ hours of UV, and guests who treat a $400 chaise like gym equipment. Four in-house capabilities make sure our loungers survive it — and we can prove it.
TIG Welding + CNC Precision
TIG-welded joints on all structural points. CNC tube bending at ±0.5° tolerance. Operator, amperage, gas flow logged per batch. Every 500th weld micrographed for penetration.
QUV Weathering Lab
All fabrics, wicker, rope, and powder coat tested at 0.89 W/m² irradiance. Pass: ΔE ≤ 4, no surface cracks, ≥ 80% tensile retention. Extended to 2,500 hrs for 5+ year warranties.
Salt Spray Corrosion
5% NaCl fog at 35°C. Aluminum: 500+ hrs zero corrosion. 316 stainless: 1,000+ hrs. Electrophoretic undercoat for saltwater resorts (1,500+ hrs). ISO 2409 adhesion test on all coated surfaces.
Frame Load Testing
Seat: 1,600 N. Backrest: 800 N. Armrest: 500 N. 30-min simultaneous hold. 100% proof-loaded at 2× rating. 50K-cycle fatigue test per batch. Load-cell data in dossier. Rating embossed on frame.
How a Lounger Gets Built.
Three Gates. Zero Shortcuts.
From raw billet to sealed container — three production gates with defined inspection criteria at each. No step advances until the previous gate is signed off.
Material Prep & Frame Fab
6063-T5 billet extruded to lounger profiles. XRF verified at receiving. Mill certs per lot. CNC mandrel bending ±0.5°. TIG weld with argon back-purge on all structural joints. Dye-penetrant on every weld.
Assembly & Finish
5-stage phosphate pre-treatment. TGIC-free polyester powder, 200°C cure. PE/rope weaving at controlled tension. Sling bartack-reinforced. 304 stainless hardware. Quick-dry foam cushions with drainage mesh.
QC & Container Loading
In-line dimensional checks at each production station. ISTA 3A packaging with full-length spine boards. Supervised container loading to approved diagram. Barcode-verified SKU scan before carton seal. Hardware kits double-counted. Compliance dossier packed inside.
Your Lounger. Your Brand.
Built to Your Spec in 6–8 Weeks.
Start from our 500+ frame library and modify to your geometry — saves 40–60% on tooling. Or engineer from scratch. Either way, your design is NNN-protected before the first file is shared.
From Your CAD to a Production-Ready Lounger
Send 3D model, sketch, or reference sample. DFM package in 5 days: tolerance stack, FEA load maps, 3-tier material options, ranked cost drivers. Pre-production sample on your desk for sign-off before any tooling is cut. Issues caught here prevent container-load recalls.
Color, Texture, Material — Exact Match
Send Pantone, RAL, or physical swatch. Spectrophotometer-matched powder coat under D65 light. ΔE ≤ 1.5 guaranteed. Proprietary PE/rope/sling colors: 1,000 kg min. Pre-production sample in your exact colorway, photographed against your reference, before production begins.
Your Tooling. Your IP. Locked Down.
NNN agreement signed before first CAD file. Molds in badge-access tool room, biannual audit, unique ID per client. Move production? Tooling ships in 72 hours. 14 years, zero IP incidents. Auditable, not marketing.
One Container. Your Entire Assortment.
Six SKUs, three price points, plus side tables and umbrellas — one 40HQ. Density-stacked: resin shells floor, aluminum mid, cushions top. Retail barcode + branded assembly insert + private-label hardware per carton. One purchase order covers the entire assortment. One set of customs paperwork. One compliance dossier for every SKU in the container.
Two Lounger Programs.
Actual PO Data. Not Hypothetical.
Loungers on Duty.
Poolside. Retail Floor. Resort Deck.
Six Questions Every Retail Buyer
Asks Before Signing a Lounger PO.
Three-tier: (1) FEA on CAD before prototyping. (2) Pre-production samples through full EN 581-2 static + 50K-cycle fatigue with load-cell recording. (3) 100% of production loungers proof-loaded at 2× rated capacity. One per 200-unit batch pulled for destructive re-test. See Quality Engineering section for full protocols.
Yes. Send CAD, sketch, or reference sample. We return DFM analysis with cost drivers, then produce a pre-production sample for your sign-off before any production begins. Your logo on the frame, carton, and hardware kit. NNN protects your IP from day zero. See OEM section above for the full process.
25–35 days from deposit + sample approval. New tooling adds 15–20 days. Peak season (Jan–Apr) may add 7–10 days. Rush production: 18–22 days for repeat orders. Weekly milestone updates throughout.
Defect confirmed via timestamped photos and batch traceability? Choose: replacement units in next container at our cost, credit against next PO, or refund. Resolved within 5 business days. Our defect rate across lounger categories is under 0.3%.
Yes — standard for our big-box clients. A typical 40HQ from us might hold 200 aluminum chaises + 150 rattan daybeds + 100 zero-gravity units + 80 side tables + umbrellas, all under one purchase order. See OEM section for how we density-stack and label per SKU.
$30–50 FOB: injection-molded PP (stacks 6-high) and basic Al tube (6063-T5, 5-position). $50–70 FOB: PE rattan over Al (UV-8, cushioned) and Textilene sling (1,500+ hr UV). $70–80 FOB: olefin rope over Al (marine-grade) and 316 stainless (1,000+ hr salt-spray). Luxury: FSC teak. We recommend the right platform for your warranty period and price point.
Got a Lounger Brief?
We'll Price It Before Tomorrow.
Lounger type. Frame material. Annual volume. Target FOB. Send those four data points and we'll come back with a line-item BOM, matched to your market's certs, mapped against 500+ existing frames — in under 24 hours. No obligation. No "let me check with the team."
Minimum annual procurement volume: $400K+. Enterprise engagements only.